features for surface mount 125 deg c, 4000 hours guaranteed. low e.s.r. and high ripple current are realized. equivalent to conductive polymer ty pe aluminum electrolytic capacitor (there are little characteristics change by temperature and frequency) refer to standard ratings. refer to standard ratings. 63 0.08 rated voltage (v) tangent of loss angle test time within -30% to +30% of initial value 200% or less of the initial s p ecified value 4000 hours capacitance change item esr chan g e leakage current (ua) -20 to +20 rated voltage (v) category temperature range (deg c) 25 to 63 uh-4610 hvk series vertical chip polymer hybrid type aluminum electrolytic capacitors specifications (20deg c) (20deg c,120hz) the initial specified value or less -55 to +125 less than 0.01cv c:rated capacitance(uf), v:rated voltage(v) after 2 minutes (125deg c,100khz) (20deg c,120hz) esr (mohm max.) 50 0.14 0.12 tolerance at rated capacitance (%) tangent of loss angle (20deg c,100khz) rated ripple current (marms max.) endurance(125deg c) (applied ripple current) leakage current tangent of loss angle 200% or less of the initial specified value performance 25 35 0.10 part numbering system (35v270uf) v- lead : sn + bi(0.5%) plating ( ) : reference size 0.60 1.00 1.00 p 100k 100k or more shelf life(125deg c) test time : 1000 hours ; other items are the same as those for the endurance. voltage application treatment. g 0.5 to 0.8 coefficient of frequency for rated ripple current casing symbol m cw 10k b tel:045 470 7255 fax:045 470 7260 3-8-11 shinyokohama, kouhoku-ku, yokohama-city, kanagawa, 222-0033, japan 2.7 3.1 8 8.7+/-0.3 8.4 (note) design,specifications are subject to change without notice. p 6.3 7.7+/-0.3 2.0 8 10.0+/-0.5 elna co. , ltd. 6.6 0.5 to 0.8 6.6 l 8.4 d 8.4 3.0 a rated voltage symbol hvk 35 271 coefficient series code - 0.10 0.30 0.7 to 1.1 trequency (hz) 1k unit : mm h10 3.1 taping symbol 120 r2 4.7 0.7 to 1.1 8.7+/-0.3 10.4 10.4 4.7 0.7 to 1.1 8.4 4.7 casing symbol f80 g90 g10 h90 h10 (note) it is recommended that you shall obtain technical specificat ions from elna co.,ltd to ensure that the component is suita ble for your intended use. outline drawing 10 10 10.0+/-0.5 10.4 10.4 4.7 e additional symbol rated capacitance symbol capacitance tolerance symbol 3.0 d +/-0.5 l 0.3 max b +/-0.2 a +/-0.2 w 0.4 +/-0.2 (c) (c) (p) tel:045 - 470 - 7255 fax:045 - 470 - 7260 http://www.elna.co.jp / ,
standard ratings hvk series vertical chip polymer hybrid type aluminum electrolytic capacitors uh-4610 st an d ar d r a ti ngs rated rated esr tangent of rated ripple part number voltage capacitance loss angle current (mohm) ( marms ) (v) (uf) 20deg c 100khz 125deg c 100khz dl hvk-25v101mf80e-r2 25 100 30 0.14 1,400 6.3 7.7 hvk-25v151mg90e-r2 25 150 27 0.14 1,500 8 8.7 external dimensions (mm) , HVK-25V221MG10E-R2 25 220 27 0.14 1,600 8 10.0 hvk-25v271mh90e-r2 25 270 25 0.14 1,700 10 8.7 hvk-25v331mh10e-r2 25 330 20 0.14 2,000 10 10.0 hvk-35v680mf80e-r2 35 68 35 0.12 1,400 6.3 7.7 hvk-35v101mg90e-r2 35 100 30 0.12 1,500 8 8.7 hvk-35v151mg10e-r2 35 150 27 0.12 1,600 8 10.0 hvk - 35v221mh90e - r2 35 220 25 012 1 700 10 87 hvk - 35v221mh90e - r2 35 220 25 0 . 12 1 , 700 10 8 . 7 hvk-35v271mh10e-r2 35 270 20 0.12 2,000 10 10.0 hvk-50v330mf80e-r2 50 33 40 0.10 1,100 6.3 7.7 hvk-50v470mg90e-r2 50 47 35 0.10 1,200 8 8.7 hvk-50v680mg10e-r2 50 68 30 0.10 1,250 8 10.0 hvk-50v820mh90e-r2 50 82 27 0.10 1,400 10 8.7 hvk-50v101mh10e-r2 50 100 25 0.10 1,600 10 10.0 hvk-63v220mf80e-r2 63 22 80 0.08 900 6.3 7.7 hvk-63v270mg90e-r2 63 27 50 0.08 1,000 8 8.7 hvk-63v330mg10e-r2 63 33 40 0.08 1,100 8 10.0 hvk-63v470mh90e-r2 63 47 35 0.08 1,200 10 8.7 hvk-63v560mh10e-r2 63 56 30 0.08 1,400 10 10.0 (note) design,specifications are subject to change without notice. (note) it is recommended that you shall obtain technical specificat ions from elna co.,ltd to ensure that the component is suita ble for your intended use. elna co ltd 3 8 11 shinyokohama kouhoku ku yokohama city kanagawa 222 0033 japan elna co ., ltd . 3 - 8 - 11 shi nyo k o h ama, k ou h o k u- k u, yo k o h ama-c it y, k anagawa, 222 - 0033 , japan http://www.elna.co.jp/ tel:045-470-7255 fax:045-470-7260
|
